• aluminum tube mill High frequency welding production

    2021-10-21

    aluminum tube production 1. Considering the transportation cost, the proportion of internal and external ore may be adjusted for ore preparation, and the proportion of internal ore will increase. 2. In order to ensure the profit of a...

  • home VC condenser production line

    2021-01-22

    What machines are needed for home VC condenser production line 1,fin punching machine technical parameter Total power :8.5 kw Quantity required :1 set Nominal force:45T Machine Model Name:CH-45T Electricity Consum...

  • Diesel engine radiator

    2020-11-30

    3 maintenance methods for radiator of diesel generator set   1: Ensure that there is no air in the radiator. The radiator should not be in the condition of partial water discharge, because it will accelerate the corrosion. For...

  • How to improve the efficiency of heat exchanger

    2020-11-24

    Heat exchanger is to transfer part of the heat of hot fluid to cold fluid equipment, also known as heat exchanger. Heat exchanger plays an important role in chemical industry, petroleum, power, food and many other industrial production. ...

  • Types of household car condenser

    2020-11-18

    1、 Types and characteristics of condenser According to the different cooling media, condensers can be divided into water-cooled, air-cooled and evaporative.   A. Water cooled condenser Water cooled condenser uses water as the...

  • Function and working principle of car condenser

    2020-11-18

    Function and working principle of car condenser   car condenser is a part of the refrigeration system, belonging to a kind of heat exchanger. It can change gas or steam into liquid, and transfer heat in the pipe to the air near ...

  • High efficiency finned tube heat exchanger

    2020-11-16

    The heat exchange tube is composed of inner tube and fin. The inner tube and fin are made by integral binding. The outer surface of the inner tube radiates along the radial direction, and there are many fins evenly distributed. Each fin ...

  • Causes and treatment of fouling in heat exchanger

    2020-11-14

    In the operation of heat exchanger, the inner and outer walls of tube bundle may be scaling, and the thermal resistance of fouling layer is much larger than that of metal tube, which leads to the rapid decline of heat transfer capacity, ...

  • Reason and treatment of red copper oxidation

    2020-11-13

    Reason and treatment of red copper oxidation   Red copper oxidation causes and red copper anti oxidation treatment? The blackening of red copper is the performance of copper oxidation. There are many reasons for copper oxidation...

  • Maintenance of high frequency welded tube machine group

    2020-11-05

    1. In the process of use, we must strictly operate according to the operation procedures in the operation manual, and we can't let the machine run and use overload. In addition, before complaining about production, that is, before the op...

  • What are the factors affecting the quality of high frequency welded pipe production line?

    2020-11-04

    What factors affect the quality of high frequency welded pipe production line? First of all, the welded pipe process is an important link in the high-frequency welded pipe production line, which can directly affect the quality of the pro...

  • Construction technology scheme of aluminum plate welding

    2020-10-28

    1. Base metal preparation: To weld aluminum, the welder must carefully clean the base metal and remove any oxide and hydrocarbon contamination from the aluminum surface with oil or solvent. The melting temperature of oxide on the surf...