11

2021-04

harmonica tube straightening and cutting machine

Main introduction This machine mainly straightens the harmonica tube of intercooler,It has 2 workstations that can work at the same time,It is mainly driven by servo motor. It works quietly and saves electricity,We can customize the professi...

22

2021-01

home VC condenser production line

What machines are needed for home VC condenser production line 1,fin punching machine technical parameter Total power :8.5 kw Quantity required :1 set Nominal force:45T Machine Model Name:CH-45T Electricity Consumption/Hour...

30

2020-11

Diesel engine radiator

3 maintenance methods for radiator of diesel generator set   1: Ensure that there is no air in the radiator. The radiator should not be in the condition of partial water discharge, because it will accelerate the corrosion. For the gener...

24

2020-11

How to improve the efficiency of heat exchanger

Heat exchanger is to transfer part of the heat of hot fluid to cold fluid equipment, also known as heat exchanger. Heat exchanger plays an important role in chemical industry, petroleum, power, food and many other industrial production. In chemica...

17

2020-11

Solution to scrap of vacuum brazing furnace parts

vacuum brazing furnace Scrapping of thermocouple breakdown products 1. Phenomenon and reason: in brazing heating, high temperature breakdown thermocouple tube shell. The display screen of thermocouple conduction temperature is obviously inaccu...

16

2020-11

High efficiency finned tube heat exchanger

The heat exchange tube is composed of inner tube and fin. The inner tube and fin are made by integral binding. The outer surface of the inner tube radiates along the radial direction, and there are many fins evenly distributed. Each fin extends al...

14

2020-11

Condenser tube grooving machine

Description: Workpiece specification:D Type/ Round Type Manifold Pipe Baffle Hole:as per customer's requirements Slot quantity:Customer setting themselves Precision tolerance range:Per customer's requirements Pipe Processed...

14

2020-11

condenser Aluminum tube bending machine

To have the aluminum tubes coil go throughdecoiling ,straightening ,bending , necking down and cutting into the required bending tubes. Through changing different tooling to bend for various flat tubes and data can be directlysaved . It is consist...

14

2020-11

Causes and treatment of fouling in heat exchanger

In the operation of heat exchanger, the inner and outer walls of tube bundle may be scaling, and the thermal resistance of fouling layer is much larger than that of metal tube, which leads to the rapid decline of heat transfer capacity, and in ser...

13

2020-11

Application fields and characteristics of fin machines

Sheet forming machine is a special processing equipment for processing heat transfer fins, which is the key component of heat exchanger. The compact heat exchanger products with such heat transfer fins have been widely used in automobile, ship,...

11

2020-11

Cause analysis of molybdenum screen cracking in high temperature vacuum brazing furnace

In high temperature vacuum brazing furnace, the metal honeycomb carrier of automotive three-way catalytic purifier was brazed in vacuum. The molybdenum screen of furnace liner was deformed and cracked in a short time. The morphology and chemical c...

10

2020-11

Positioning fixture for aluminum brazing

During brazing, the components connected by the brazed parts must be fixed in the position for assembly. During the whole brazing process, the relative position should be fixed to ensure that the welding gap meets the design requirements and the g...